Neptune T-10 E-Coder Potable Water Meter with a R900 V4 Interface Unit (MIU)

Description

Brand new Neptune T-10 1” Potable Water Meter with with (1-50 gpm) dial gauge AND E-Coder)R900i electronic data head. Original price over 0.  Selling for 0 each. 4 units available.  12lbs, shipping.
The E-coder is used by many municipalities to read community water meters.
The E-Coder)R900
i
by Neptune is an integrated register that contains both the E-Coder
®
and R900
®
technologies in one register that collects meter reading data. It then transmits the data for collection by the meter reader. A Neptune walk-by, mobile, or R900 Gateway fixed network data collection system receives the data and stores it to be downloaded into the utility billing system for processing.
The E-Coder)R900
i
is easily installed and operates within an RF band which does not require an operating license. The E-Coder)R900
i
meets FCC regulations part 15.247 allowing higher output power and greater range. The E-Coder)R900
i
uses frequency- hopping spread spectrum technology to avoid RF interference and enhance security. The transmitted data is updated at 15-minute intervals and transmits a mobile message that includes the meter reading data and the unique 10-digit E-Coder)R900
i
ID every 14 seconds. This allows the meter to be read by a handheld unit (HHU) or mobile data collections unit. The E-Coder)R900
i
also transmits a high power fixed network message every seven and one-half minutes on an interleaved basis to an R900 Gateway.
The E-Coder)R900
i
is designed to offer advantages to utility organizations of all sizes:
Increases meter reading accuracy
Eliminates hard-to-read meters
Protects utility liability by increasing meter reader safety
Requires no external wiring or programming
Provides enhanced 8-digit AMR meter reading
Provides proactive customer service benefits (leak, tamper, and backflow detection)